4152牌号UHMWPE高分子聚乙烯护舷贴面板，港口码头护舷专用材质贴面板。

耐腐蚀、吸水率低、抗冲击护舷贴面板。

- 不腐烂，裂开或破裂；100％可回收- 

   码头用可回收和防腐的船用护舷板，Recyclable and anti-rot marine fender facing pads for dock港口用可回收和防腐的船用护舷板 ，材质：高分子聚乙烯UHMWPE;Shandong Ningjin Davos Chemical Co.,Ltd宁津达沃斯工程塑料有限公司定制。


    用于码头的可回收和防腐的船用护舷板护垫低摩擦系数uhmwpe 1000工程护舷板
    Recyclable and anti-rot arine fender facing pads for dock Low Coefficient of Friction uhmwpe 1000 engineering fender pads


    用于码头的可回收且防腐的船用护舷板衬垫低摩擦系数uhmwpe 1000工程护舷板可以避免船舶与码头之间的碰撞损坏。由于具有很高的抗冲击性能，用于码头的可回收和防腐的船用护舷板非常低的摩擦系数uhmwpe 1000工程护舷板代替了传统的钢制护舷板，在国内外港口和码头中广泛使用。   
1.耐-269℃的
低温2.吸水率＜0.01％
3.耐腐蚀性
高4.耐冲击性
5.抗紫外线，使用寿命长
    Recyclable and anti-rot marine fender facing pads for dock Low Coefficient of Friction uhmwpe 1000 engineering fender pads could avoid the impact damage between ships and dock. Because of the high impact resistance performance, Recyclable and anti-rot marine fender facing pads for dock Very Low Coefficient of Friction uhmwpe 1000 engineering fender pads instead of the traditional steel ones is widely used in ports and docks at home and abroad.
1. Low-temperature resistance In -269℃
2. Low water absorption ＜0.01%
3. High Corrosion resistance 
4. High impact resistance
5. UV resistance and long service life




UHMWPE的优势和主要特点
-所有聚合物中zui高的耐磨性，是钢的六倍-耐候性和抗老化性
-自润滑，很低的摩擦系数
- 优异的耐化学腐蚀性能
- 优异的抗冲击性，噪音
-吸收，振动吸收
-温度范围：-2600C?+ 800C; 很好的耐寒性，即使在-1800C下也不会变脆。
-高抗拉强度
–无毒无味
–耐紫外线–阻燃；吸水率相对较低
- 优异的电性能
- 良好的抗环境应力开裂性能，是普通PE的200倍-无附着力
-重量轻且易于处理和固定 - 成本效益; 降低能耗
-不会腐烂，裂开或破裂; 100％可回收
- 适用于工业物料搬运应用的耐磨自润滑衬里材料
- 易于再加工
PE Advantages & Key Features
--Highest abrasion resistance of any polymer, 6 times more wear resistant than steel
--Anti-Weather & Anti-Aging
--Self-lubricating, Very low coefficient of friction
--Excellent chemical & corrosion resistant
--superior impact resistant, Noise- absorption, Vibration-absorption 
--Temperature range: -2600C ~ +800C; Very high resistance to cold, doesn't become fragile even under -1800C 
--High tensile Strength
--Non-Toxic and smell
--UV resistance
--Flame Retardant; Relatively low in water absorption
--Excellent electrical properties
--Good performance in resisting environment stress crack, 200 times of ordinary PE
--No adhesion 
--Light weight and easier to handle and fix
--Cost efficient; Resulting in low energy consumption
--Does not rot, split or crack; 100% recyclable 
--Great liner material for industrial material handling applications
--Easy Reprocessed




   高分子聚乙烯压制模具尺寸Machine Parts Mould size：
1000×3000× (6 - 200 )   mm
1200×1200× (6 - 300)    mm
1200×4000× ( 6 - 80 )    mm
1250×3100×  (6 - 200)   mm
2200×10000×(10-130)   mm
   UHMWPE板材可以根据客户要求进行再加工UHMWPE Sheets could be reprocess under customer's requirements.